Skip to content
Trustpilot 4.8/5 average rating
Ghostex.ai 5 AI agents · 24/7
Launch swap
5 AI agents · 24/7 No humans. No KYC. Fully automated.

Automated swapRun by AI agents

USDTBNB Chain BEP20 USDTEthereum ERC20

Swap USDT BEP20 to ERC20: BNB Smart Chain to Ethereum

Ghostex.ai swaps USDT BEP20 to ERC20 with no account or KYC and a 0.48% fee.

USDT BEP20 to ERC20 takes Tether sent as a BEP-20 token on BNB Smart Chain and pays ERC-20 USDT on Ethereum mainnet to your 0x address. Orders start at $20, the 0.48% fee is inside the quote, and the payout usually goes out about 2-5 minutes after your deposit is sent.

Both chains use the same 0x format, so copy the payout from your wallet’s Ethereum account or an exchange’s ERC20 option; the form cannot tell the chains apart. Ghostex waits for 15 confirmations, about 7 seconds at 0.45-second blocks, before the ERC-20 payout goes out.

The sending wallet needs BNB for its gas; receiving needs no ETH, as Ghostex covers the Ethereum payout fee. Orders can be as large as about $10,000,000. If the swap cannot complete, the USDT is refunded automatically as BEP-20 on BNB Smart Chain, minus the network cost.

  • No KYC
  • No account
  • 0.48% flat fee
  • Automatic refunds

Pair details

USDT BEP20 to ERC20 at a glance

The same dollar stablecoin changes chains: it leaves as a BEP-20 token on BNB Smart Chain and arrives as an ERC-20 token on Ethereum mainnet. Both ends use 0x addresses, and that is the part to get right.

You send
USDT as a BEP-20 token on BNB Smart Chain, to the deposit address on your order. Sentinel waits for 15 confirmations. Your wallet pays the network fee in BNB.
You receive
USDT as an ERC-20 token on Ethereum, the contract that Tether lists at 0xdac17f958d2ee523a2206206994597c13d831ec7. Courier broadcasts it to the address on your order.
Payout address
An Ethereum address: 0x and 40 hexadecimal characters, the same shape as your BNB Smart Chain address. The form checks the format and, on mixed-case addresses, the EIP-55 checksum. It cannot tell which chain you copied the address from.
Memo or tag
None. Neither chain uses a memo for USDT transfers.
Refund address
Optional, and also 0x. A refund comes back as BEP-20 USDT on BNB Smart Chain, never on Ethereum, to that address or to the one you paid from. Paying from an exchange? Add a BNB Smart Chain address you control.
Limits
$20 to about $10,000,000 in USD value. The higher $50 minimum applies when BTC or mainnet ETH is on either side of a swap; USDT on Ethereum is a token, so it does not trigger it.
Rate
Fixed for 30 minutes from order creation, or floating and settled when the swap executes. The 0.48% fee is inside either quote.
Typical time
About 2-5 minutes from sending the USDT to the ERC-20 payout: the BNB Smart Chain deposit confirms in seconds, and Ethereum adds a block every 12 seconds. Most swaps take an estimated 5-30 minutes end to end.

No BNB for gas? The deposit is a BEP-20 transfer, and BNB Smart Chain takes its fee only in BNB, so a wallet that holds USDT alone cannot send it. Withdraw the USDT from an exchange straight to the order’s deposit address, or add a little BNB first, for example with ETH to BNB; USDT but no gas coin lists more routes.

Related guides. Going the other way? USDT ERC20 to BEP20 reverses this order. Your BNB Smart Chain wallet needs BNB for the deposit, which ETH to BNB can supply, and the Ethereum address needs ETH to move the USDT on later; no gas, only USDT lists the routes when USDT is all you hold. Tron users: BEP20 to TRC20 and TRC20 to BEP20.

Step by step

How to swap USDT BEP20 to ERC20 in 4 steps

The whole move is one order, with no account and no sign-up. Before you start, make sure the sending wallet holds a little BNB as well as the USDT.

  1. 1. Pick the pair

    In the form at the top of this page, send USDT on BNB Smart Chain (BEP20) and receive USDT on Ethereum (ERC20). Enter an amount from $20 to about $10,000,000, then choose a fixed rate, held for 30 minutes, or a floating one.

  2. 2. Paste your Ethereum 0x address

    Copy it from your wallet’s Ethereum account, or from an exchange’s USDT deposit page with ERC20 selected. The form checks the format but cannot tell which chain a 0x address came from. Paying from an exchange? Add a BNB Smart Chain refund address you control.

  3. 3. Send from your BNB Smart Chain wallet

    Send the exact quoted amount of BEP-20 USDT, with BNB Smart Chain selected, to the deposit address generated for your order. The wallet pays the gas in BNB, so it needs a little BNB beside the USDT.

  4. 4. Wait for 15 confirmations

    Sentinel waits for 15 BNB Smart Chain confirmations, about 7 seconds at 0.45-second blocks, and Courier then broadcasts the ERC-20 USDT. The payout usually goes out about 2-5 minutes after you send; follow it on the order tracking page.

Use case

Why swap USDT BEP20 to ERC20?

The USDT you hold is on BNB Smart Chain, and the place that needs it takes Ethereum mainnet only: a DeFi app, an invoice that names ERC-20, a hardware-wallet account set up for Ethereum, or an exchange deposit page that lists ERC20 and not BEP20. The two tokens are separate contracts, so the balance cannot be switched in place. Most multi-chain wallets show one account with a separate USDT balance per network, which is why the question comes up at all.

Three routes exist. An exchange account takes a BEP20 deposit and an ERC20 withdrawal, under its own ID rules. A bridge or a wallet’s built-in swap does it from your own wallet, but offers and supported routes differ by app and version, so read the quote screen and check that it ends in USDT on Ethereum, not in a wrapped lookalike (wrapped vs native crypto). A no-account swap, like this page, is one order: paste an Ethereum address, send BEP-20 USDT, receive ERC-20 USDT.

The three routes, with their steps and costs, are compared in how to convert USDT between networks.

Addresses

One address format, two chains: which 0x goes where

An Ethereum-style account address is, in the words of Ethereum’s accounts documentation, the last 20 bytes of the Keccak-256 hash of the public key with 0x in front. Nothing in it names a chain. One wallet account therefore shows the same string on BNB Smart Chain and on Ethereum, and the address check in the form, which tests format and checksum only, passes either. This order uses three 0x addresses and only the network decides which chain each one lives on.

Which 0x address goes in which field
FieldChain it lives onWhere to copy itIf it is wrong
Deposit address (shown on your order)BNB Smart ChainThe order page; send with BNB Smart Chain selected in your walletUSDT sent from Ethereum or any other network falls outside the automatic flow: no swap runs and no automatic refund is sent
Payout address (you enter it)Ethereum mainnetYour wallet’s Ethereum account, or an exchange’s USDT deposit page with ERC20 selectedA self-custody wallet can usually reach the USDT by switching networks; an exchange may never credit it
Refund address (optional)BNB Smart ChainA BNB Smart Chain wallet you controlA refund is always BEP-20 USDT, so an address from an ERC20-only exchange tab may not credit it
One 0x address, two chains: which address in this order lives on BNB Smart Chain and which on EthereumDiagram of one 0x address format on two chains. A 0x address is 0x plus 40 hexadecimal characters and nothing in it names a chain, so one wallet account shows the same string on BNB Smart Chain and on Ethereum. On BNB Smart Chain, this order uses the deposit address shown on your order and the optional refund address; the USDT contract there is 0x55d3…7955 (BEP-20). On Ethereum mainnet, it uses the payout address you enter, copied from an ERC20 option; the USDT contract there is 0xdAC1…1ec7 (ERC-20). The network, not the address, decides where the USDT goes.One 0x address, two chains0x + 40 hex characters, no chain in itBNB Smart ChainDeposit address, shown on your orderRefund address, optionalUSDT contract 0x55d3…7955 (BEP-20)Ethereum mainnetPayout address, you enter itCopy it from an ERC20 optionUSDT contract 0xdAC1…1ec7 (ERC-20)The network, not the address, decideswhere the USDT goes.
One 0x address format, two chains: this order’s deposit and refund addresses live on BNB Smart Chain and the payout address on Ethereum mainnet, as in the table above. The form checks the format and checksum only, so it cannot tell which chain an address was copied from. The two USDT contracts are linked in the measurement table below.

Your own wallet. If the Ethereum payout address is the very account you use on BNB Smart Chain, pasting it is fine for an ordinary wallet, because the key behind it signs on both chains. A smart-contract wallet, such as a multisig, exists only on the chains where it was deployed, so ask its provider before you use it as the payout address.

An exchange. Open its USDT deposit page, select ERC20 (Ethereum) and copy the address from that screen, even when the BEP20 option shows the identical string. Exchanges credit per network, and what they do with a deposit on a network they did not list for that address is their decision; sent USDT to the wrong network covers who can recover what.

Check the string. Compare the first and last characters of the pasted address against its source. Lookalike addresses planted in transaction histories are a real attack: see address poisoning.

Fees and timing

What does USDT BEP20 to ERC20 cost, and how long does it take?

The Ghostex fee is a flat 0.48% of the USDT you send, already inside the ERC-20 amount the form shows. The network costs on each side differ a lot, and we measured them.

Fee on this pair: 0.48% of the amount sent
USDT sent on BNB Smart Chain0.48% fee
100 USDT0.48 USDT
2,500 USDT12.00 USDT
40,000 USDT192.00 USDT
Measured on 7 October 2026 at about 16:18 UTC, read from public nodes of each chain
MeasureBNB Smart ChainEthereum
Block time0.451 s (1,000 blocks in 451 s, up to block 126,282,674)12.0 s (100 blocks in 1,200 s, up to block 26,141,653)
Confirmations Ghostex counts15, about 7 s (deposit side of this order)12, about 2.4 min (deposit side of the reverse order)
Gas used by 12 direct USDT transfer calls in one block29,715 to 51,615 (sample tx)38,497 to 63,221 (sample tx)
Gas price at the time0.05 gwei, as suggested by the node5.12 gwei base fee
Cost of such a call at that priceAbout 0.0000015 to 0.0000026 BNBAbout 0.0002 to 0.0003 ETH, before any priority tip
Decimals of the USDT contract18, at 0x55d3…79556, at 0xdAC1…1ec7
BNB Smart Chain and Ethereum: block time, confirmation wait and gas used by a USDT transfer, 7 October 2026Three panels comparing BNB Smart Chain and Ethereum, read from public nodes on 7 October 2026 at about 16:18 UTC. Block time: BNB Smart Chain 0.451 seconds (1,000 blocks in 451 seconds), Ethereum 12.0 seconds (100 blocks in 1,200 seconds). Wait for the confirmations Ghostex counts: 15 BNB Smart Chain blocks, about 7 seconds; 12 Ethereum slots, about 2.4 minutes. Gas used by 12 direct USDT transfer calls on each chain, one dot per transfer: BNB Smart Chain 29,715 (2 transfers), 29,739, 34,503 (2 transfers), 34,515 (3 transfers), 46,803, 51,603, 51,615 (2 transfers); Ethereum 38,497, 41,309 (5 transfers), 46,085, 46,097, 46,109, 46,121, 63,197, 63,221.Block timeBNB Smart Chain0.451 sEthereum12.0 sWait for the confirmations Ghostex countsBNB Smart Chain: 15 blocksabout 7 sEthereum: 12 slotsabout 2.4 minGas used by 12 direct USDT transfersBNB Smart Chain29,715 to 51,615Ethereum38,497 to 63,22130,00040,00050,00060,000
Block time, the wait for the confirmations Ghostex counts, and the gas used by 12 direct USDT transfers on each chain (one dot per transfer), read from public nodes on 7 October 2026 at about 16:18 UTC: one snapshot, not a forecast. Gas price at the time: 0.05 gwei on BNB Smart Chain, paid in BNB, and a 5.12 gwei base fee on Ethereum, paid in ETH. Data: bsc-eth-block-gas-2026-10-07.json on the Ghostex.ai open data page.

Reading the table. The figures are one snapshot, not a forecast: Ethereum’s base fee moves with demand, and we give no dollar values because the coin prices move too. Gas varies from call to call, which is why each column is a range. Your wallet’s fee preview is the number that applies to your transfer. Every reading and all 24 transactions are in the raw data, and the script is published with the method, so you can repeat the measurement.

Deposit wait. Fifteen confirmations are more than the twelve Ghostex counts on Ethereum, yet far quicker: 15 blocks at 0.451 s take about 7 seconds, while 12 Ethereum slots take 2.4 minutes. BNB Smart Chain has run 0.45-second blocks since the Fermi hard fork of 14 January 2026. On the payout side, a block holding your USDT appears within one 12-second slot, but Ethereum treats it as final only after at least two epochs, about 12.8 minutes. A receiving exchange sets its own confirmation count, so check its deposit rules before you assume the money is spendable.

Who pays which fee. Your wallet pays the BNB gas for the deposit; it goes to the network and is not refunded. Ghostex covers the Ethereum gas for sending your payout, and it is already reflected in the quote. Moving the USDT on from your Ethereum address later costs ETH.

Before you send

USDT BEP20 to ERC20 mistakes to avoid

Sending from the Ethereum tab One wallet account lists USDT under both networks. Before you confirm, check the network label and that the fee is quoted in BNB: a fee in ETH means you are about to send on Ethereum, to a deposit address that only BNB Smart Chain watches.
Refund address copied from the ERC20 tab A refund returns as BEP-20 USDT on BNB Smart Chain. Give an address you control on that chain, or leave the field empty only when you pay from your own wallet. Details in how automatic refunds work.
No ETH where the USDT lands The payout can land in a wallet that holds no ETH, and moving it on costs ETH because Ethereum gas is paid in ETH. If USDT is all you have, no gas, only USDT compares the ways to get a little ETH first.

Who runs the order. Sentinel counts the BNB Smart Chain confirmations and Courier sends the ERC-20 payout; Oracle, Router and Executor price, route and fill the swap in between (how the five agents work). Fix the quote for 30 minutes or let it float until execution: fixed vs floating rates.

FAQ

BEP20 to ERC20 USDT questions

Is a BEP20 address the same as an ERC20 address?

In format, yes: 0x and 40 hexadecimal characters, and one wallet account shows the same string on both chains. The network, not the address, decides where the USDT goes. In this order the payout address must be on Ethereum, so copy it from the ERC20 option at an exchange; the form cannot detect a mix-up.

Do I need BNB to send and ETH to receive?

You need BNB in the sending wallet, because the deposit’s network fee is paid in BNB. An exchange withdrawal pays it inside its own fee. Receiving needs nothing. You need ETH only later, to move the USDT on from Ethereum.

Why is the minimum $20 when Ethereum is involved?

The higher $50 minimum applies when BTC or mainnet ETH itself is on either side of a swap. Here both sides are USDT tokens, so the standard $20 minimum applies. The form shows the exact limits in USDT for your quote.

How long does BEP20 to ERC20 take?

Usually about 2-5 minutes from sending the USDT to the ERC-20 payout. The deposit needs 15 confirmations, about 7 seconds at the 0.451-second block time we measured on 7 October 2026, and Ethereum adds a block every 12 seconds once the payout is broadcast.

Where does a refund go?

Back to BNB Smart Chain as BEP-20 USDT, minus the network cost of sending it: to the 0x refund address you entered, or to the address the deposit came from. USDT sent on another network gets no automatic refund.

Is USDT on BNB Smart Chain the same token as USDT on Ethereum?

No. They are separate contracts with different decimals: when we read them on 7 October 2026, the BNB Smart Chain contract reported 18 decimals and the Ethereum contract 6. Wallets and the order form show amounts in USDT either way, so you meet the difference only if you call a contract by hand.

Do I need an account or KYC?

No. The order needs only the amount, your Ethereum address and, optionally, a BNB Smart Chain refund address. No name, email, phone or ID is asked for at any point. An order linked to a prohibited use can still be delayed, declined or refunded under Terms s.6.

Keep exploring

Other swaps and guides

Before you send, see what each chain charges in the cheapest network to send USDT, or weigh Tron against Ethereum in USDT TRC20 vs ERC20. If a transfer already went out on the wrong chain, start with sent USDT on the wrong network.

Ready when you areAbout 2-5 minutes

Move USDT to Ethereum now

Enter the USDT amount and a 0x address from the ERC20 option, then send the BEP-20 USDT from a BNB Smart Chain wallet that holds a little BNB.

Exchange now