Automated swapRun by AI agents
Swap USDT ERC20 to BEP20: Ethereum to BNB Chain
Ghostex.ai swaps USDT ERC20 to BEP20 with no account or KYC and a 0.48% fee.
To swap USDT ERC20 to BEP20, send USDT on Ethereum mainnet to the deposit address on your order and receive BEP-20 USDT on BNB Smart Chain at your 0x address. Orders start at $20, the flat 0.48% fee is already in the quote, and the payout usually arrives about 2-5 minutes after your deposit is sent.
USDT ERC20 to BEP20 takes Tether sent on Ethereum mainnet and pays BEP-20 USDT on BNB Smart Chain to your 0x address; bnb1… addresses from the retired Beacon Chain are rejected. Because both chains use 0x addresses, only the network you pick decides where the USDT lands. Ghostex waits for 12 Ethereum confirmations, about 2.4 minutes, so the BEP-20 payout usually arrives about 2-5 minutes after your deposit is sent. Your wallet pays the deposit gas in ETH; you need no BNB to receive, since Ghostex covers the payout fee.
Orders run from $20 to about $10,000,000, with the 0.48% fee inside the quote, and a fixed rate holds the BEP-20 amount for 30 minutes. If the swap cannot complete, the USDT is refunded automatically on Ethereum, minus the gas of sending it.
Pair details
USDT ERC20 to BEP20 at a glance
The token stays the same and the chain changes: it leaves Ethereum as ERC-20 and arrives on BNB Smart Chain as BEP-20, with Ethereum gas paid once, on the way in.
- You send
- USDT on Ethereum mainnet, to the deposit address on your order. Sentinel waits for 12 confirmations. USDT on any other chain is a different asset here.
- You receive
- USDT on BNB Smart Chain, sent by Courier. The BNB gas for the payout is on Ghostex.
- Payout address
- A 0x address of 40 hex characters. The form checks the format and, on mixed-case addresses, the EIP-55 checksum, and rejects bnb1… addresses.
- Memo or tag
- None, on either chain.
- Refund address
- Optional, in 0x format. A refund returns as ERC-20 USDT on Ethereum, minus the gas of sending it.
- Limits
- $20 to about $10,000,000. The $50 minimum applies only when Bitcoin or mainnet Ether is on a side; USDT keeps $20.
- Rate
- Fixed for 30 minutes from order creation, or floating until execution. The 0.48% fee is inside either quote.
- Typical time
- About 2-5 minutes from sending the USDT to the BEP-20 payout. Twelve Ethereum blocks took 2.4 minutes at the average measured from 30 September to 7 October 2026; most swaps take an estimated 5-30 minutes end to end.
No ETH for gas? An ERC-20 transfer is paid in ETH, so a wallet with USDT and zero ETH cannot send this deposit. Withdraw the USDT from an exchange to the order’s deposit address, or top up a little ETH first; USDT but no gas coin lists every route.
Use case
Why swap USDT ERC20 to BEP20?
Two reasons come up most. One is the destination: the wallet, dApp or exchange deposit page you need accepts BEP-20 only. The other is cost: each USDT transfer on Ethereum pays gas in ETH, while the same transfer on BNB Smart Chain costs a small fraction of that, as measured below. For the other direction there is a BEP20 to ERC20 swap.
Through an exchange you would register, deposit, wait for the credit and withdraw on BEP20, paying its withdrawal fee. Here it is one order with no sign-up, and a deposit that cannot complete is refunded automatically, on Ethereum.
Deposit leg
What does the Ethereum gas for the deposit cost?
The Ghostex fee is a flat 0.48%. Ethereum gas is the one cost on this route that moves around, so it was measured instead of guessed.
On 7 October 2026 at 16:18 UTC we read Ethereum through a public node. In 40 direct USDT transfers from the latest blocks, gas used was 46,109 at the median, with a range of 41,297 to 63,209. The top of the range appears when the recipient held no USDT before: in a second check of 69 transfers, all 27 above 58,000 gas went to such an address, because that first balance write costs about 17,100 gas more. Gas is paid in ETH. The table prices the median transfer at four base fees from 84 samples taken every two hours between 30 September and 7 October, with ETH at $2,571.69 (CoinGecko).
| Base fee | Where it was seen | Gas cost |
|---|---|---|
| 0.061 gwei | Lowest of the 84 samples | $0.007 |
| 0.130 gwei | Median of the samples | $0.015 |
| 1.363 gwei | 90th percentile of the samples | $0.16 |
| 5.032 gwei | Highest sample, and block 26,141,654 | $0.60 |
Before you confirm. These figures are a snapshot, not a forecast, and leave out the priority tip (median 0.49 gwei over the latest 1,024 blocks, about $0.06 more here). Your wallet's fee preview is the number that applies.
The way out is cheaper. On BNB Smart Chain a direct USDT transfer used 34,515 gas at the median of 41 sampled, at about 0.05 gwei. With BNB at $771.23 that is roughly $0.0013, about 12 times less than the Ethereum deposit at the median base fee. Fees on BNB Smart Chain are paid in BNB.
| USDT sent on Ethereum | 0.48% fee | Deposit gas at 5.03 gwei, as a share |
|---|---|---|
| 20 USDT | 0.10 USDT | 3.0% |
| 250 USDT | 1.20 USDT | 0.24% |
| 2,000 USDT | 9.60 USDT | 0.03% |
| 10,000 USDT | 48.00 USDT | 0.006% |
Who pays what. Gas is flat per transfer, so it matters on small orders: at the $20 minimum a 5 gwei spike costs six times the Ghostex fee, while at 2,000 USDT it is noise. Your wallet pays it to the network, not to Ghostex.
From an exchange
Withdrawing the ERC-20 USDT from an exchange
An Ethereum withdrawal carries the exchange's own fee, a fixed USDT charge meant to cover mainnet gas. Whether it comes out of the figure you type varies: our exchange withdrawal guide, checked on 30 September 2026, found that Binance.US deducts it and Binance lets you choose. Ghostex sees only what lands on the deposit address, so that amount must match the order.
Example with a made-up fee: the order asks for 500.00 USDT and the exchange deducts 4.00. Typing 500 delivers 496.00, an off-quote deposit that loses the locked rate; typing 504.00 delivers 500.00. A floating rate prices whatever arrives; why the exact amount matters lists every case. The 30-minute window must also cover the exchange's security checks plus 2.4 minutes of confirmations. Withdrawals leave from a shared address, so add a 0x refund address you control.
Network labels
ERC20, BEP20, BSC and BNB Smart Chain: what the labels mean
One network goes by several names, so match the chain ID, not the nickname. Tether's supported protocols page gives a USD₮ contract for Ethereum, while its BNB Smart Chain entry lists only Tether Gold, so check the USDT contract in the table below.
| Label you may see | Network | What to check |
|---|---|---|
| ERC20, Ethereum | Ethereum mainnet; ERC-20 is its token standard | Chain ID 1. Tether publishes the USDT contract 0xdAC17F95…1ec7, with 6 decimals. |
| BEP20, BSC, BNB Smart Chain | BNB Smart Chain, formerly Binance Smart Chain; BEP-20 is its token standard | Chain ID 56. The USDT token at 0x55d398…7955 has 18 decimals; wallets convert. |
| BEP2, bnb1… | BNB Beacon Chain, which stopped processing transactions on 19 November 2024 | The payout field rejects these. |
Same address, different chain. Both networks use the 0x format, so no address check can tell them apart and only the network you pick decides where the payout goes. At a receiving exchange, copy the address from its BNB Smart Chain (BEP20) option; that choice is what the network warning on its deposit page is about.
Avoid these
USDT ERC20 to BEP20 mistakes to avoid
Who runs the order. Sentinel counts the 12 Ethereum confirmations, Executor fills the swap and Courier sends the BEP-20 payout, after Oracle and Router set the price and the path (the five agents). Lock the quote for 30 minutes or let it float: fixed vs floating rates. No account, name or ID is asked for. An order linked to a prohibited use can still be delayed, declined or refunded under Terms s.6.
FAQ
ERC20 to BEP20 USDT questions
Do I need ETH to swap USDT ERC20 to BEP20?
Yes, for the deposit only: Ethereum gas is paid in ETH by your wallet, or inside the fee when an exchange sends the USDT. You need no BNB to receive, because Ghostex covers the BNB Smart Chain fee for the payout.
How much does the Ethereum deposit gas cost?
About $0.015 at the 7-day median base fee of 0.130 gwei and $0.60 at the 5.03 gwei peak, for the median 46,109-gas USDT transfer with ETH at $2,571.69 on 7 October 2026. Your wallet shows the exact fee first.
Does the $50 minimum apply to USDT on Ethereum?
No. The $50 minimum applies when Bitcoin or Ether on Ethereum mainnet is on a side of the swap. Both sides here are USDT, so $20 applies, though a gas spike can outweigh the 0.48% fee on small amounts.
My exchange delivered less than the quoted amount. What now?
On a fixed rate the locked rate no longer applies: the deposit is executed at the market rate or refunded automatically, and your order page shows which. A floating rate swaps whatever arrives.
Where does a refund go, and what does it cost?
Back to Ethereum as ERC-20 USDT, to your refund address or the address you paid from, minus the gas of sending it. When you pay from an exchange, add your own 0x refund address.
How long does ERC20 to BEP20 take?
Usually about 2-5 minutes from sending the USDT to the BEP-20 payout. Twelve Ethereum confirmations take about 2.4 minutes at the 12.045-second average block time measured from 30 September to 7 October 2026, and BNB Smart Chain blocks averaged 0.450 seconds.
Keep exploring
Other swaps and guides
Compare three ways to convert USDT between networks and the cheapest network to send USDT. If a deposit hangs, read Ethereum transaction pending; if USDT went to the wrong network, start there.
Ready when you areAbout 2-5 minutes
Move USDT to BNB Smart Chain now
Enter the USDT amount and a 0x address from your BNB Smart Chain wallet, then send the ERC-20 USDT from Ethereum with a little ETH for gas.