Skip to content
Trustpilot 4.8/5 average rating
Ghostex.ai 5 AI agents · 24/7
Launch swap
5 AI agents · 24/7 No humans. No KYC. Fully automated.

Monero7 min read

Monero address types: standard, subaddress and integrated

By the Ghostex team

Updated

A Monero address is 95 characters starting with 4 (standard) or 8 (subaddress), or 106 characters (integrated, with a payment ID inside). Here is how to tell them apart, what became of payment IDs and which one to paste into a payout.

  • Monero
  • Addresses

Short answer: Monero has three mainnet address types. A standard address is 95 characters long and starts with 4, a subaddress is 95 characters and starts with 8, and an integrated address is 106 characters and starts with 4. To receive a swap payout in your own wallet, paste a new subaddress each time: the Monero documentation says a subaddress is what you should use by default to receive. Paste an integrated address only when an exchange or shop gives you one. A payment ID that travels separately from the address is obsolete.

Getting XMR from a swap? Pick the coin you hold, for example a BTC to XMR swap or an LTC to XMR swap, and paste the address into the Monero field. It has no payment ID box to fill in.

Cover: Monero address types: standard, subaddress and integrated

What are the three Monero address types?

Every Monero address holds two public keys, one for spending and one for viewing, plus a checksum. A first byte, the network byte, names the network and the address type, and it decides the first character you see. The table lists the mainnet types. Their network bytes are 18 for a standard address, 42 for a subaddress and 19 for an integrated one, as set in the Monero source code.

Monero mainnet address types
TypeStarts withLengthWhat it holdsTypical use
Standard (primary)495 charactersPublic spend key, public view key, checksumThe main address of a wallet; the most widely supported
Subaddress895 charactersSame layout, with keys derived from an account and an indexReceiving: one per payer or payment
Integrated4106 charactersA standard address plus an 8-byte payment IDExchanges and shops that match deposits automatically

Where 95 and 106 come from. A standard address is 69 bytes: 1 network byte, 32 bytes of public spend key, 32 bytes of public view key and a 4-byte checksum. Monero’s Base58 writes every full 8-byte block as 11 characters and the final 5 bytes as 7, so 69 bytes become 95 characters. An integrated address adds the 8-byte payment ID, which makes 77 bytes and 106 characters. The checksum is the first four bytes of a Keccak-256 hash of everything before it, so one mistyped character is caught before any money moves. The alphabet leaves out 0, O, I and l, as the standard address page of the Monero documentation points out, so those look-alikes cannot appear.

Anatomy of a Monero address: network byte, two public keys, payment ID and checksumDiagram of the bytes inside a Monero mainnet address, keys and payment ID drawn to scale. A standard address or subaddress is 69 bytes: 1, a network byte, 18 for a standard address or 42 for a subaddress; a 32-byte public spend key; a 32-byte public view key; 2, a 4-byte checksum, the first 4 bytes of a Keccak-256 hash of everything before it. Encoded, it is 95 characters and starts with 4 or 8. An integrated address is 77 bytes: 3, network byte 19; the same two 32-byte keys; 4, an 8-byte payment ID set by the receiver; and the 4-byte checksum. Encoded, it is 106 characters and starts with 4. Monero Base58 writes each full 8-byte block as 11 characters and the last 5 bytes as 7.Standard address or subaddress: 69 bytespublic spend key32 bytespublic view key32 bytes121network byte: 18 standard, 42 subaddress2checksum, 4 bytes: start of a Keccak-256 hashEncoded: 95 characters, starting with 4 or 8Integrated address: 77 bytespublic spend key32 bytespublic view key32 bytes3423network byte: 19 integrated4payment ID, 8 bytes, from the receiverEncoded: 106 characters, starting with 4Monero Base58 writes each full 8-byte block as11 characters and the last 5 bytes as 7.
What the 95 and 106 characters hold, in bytes before Base58 encoding; the keys and the payment ID are drawn to scale. The byte layout follows the Monero documentation on standard and integrated addresses; a subaddress uses the standard layout.

How do you tell the types apart at a glance?

Check the first character and the length. Ninety-five characters starting with 4 is the main address of a wallet. Ninety-five starting with 8 is a subaddress. A 106-character address is integrated. Wallets build the first two from the same seed: the main address is subaddress 0 of account 0, and every other subaddress is derived from the seed with an account number and an index, as the subaddress page explains. In the command-line wallet, wallet_info shows your standard address, address new adds a subaddress and address all lists them, according to the CLI reference.

Monero’s two test networks use other network bytes, so their addresses begin with other characters. On 7 October 2026 we generated 20,000 random addresses of each kind with the same Base58 routine the swap form uses and recorded the first character.

First character of Monero addresses by network and type
NetworkStandardSubaddressIntegratedNetwork bytes
Mainnet (real XMR)48418, 42, 19
Stagenet57524, 36, 25
Testnet9 or ABA53, 63, 54

A mainnet wallet never produces an address starting with 5, 7, 9, A or B. If you see one, it belongs to a test network that real XMR cannot reach. The swap form rejects all six test-network formats with “Testnet addresses aren’t supported.”

What was a Monero payment ID, and does it still matter?

Monero hides the receiver, so a service with one deposit address cannot tell its customers’ payments apart by reading the chain. The first fix was a payment ID: an optional 32-byte tag, 64 hexadecimal characters, attached to the transaction in the clear. The sender had to remember to add it, and the Moneropedia says it was used mainly to tie incoming payments to user accounts. The table shows how it was phased out.

From payment IDs to subaddresses
DateWhat changed
1 January 2016Release 0.9.0 “Hydrogen Helix” adds encrypted payment IDs and the integrated address, which carries an 8-byte payment ID inside the address (release notes).
24 March 2018Release 0.12.0.0 “Lithium Luna” adds subaddresses, with addresses starting with 8, and accounts (release notes).
4 June 2019The Monero developers announce that long payment IDs will be phased out and tell services to move to subaddresses or integrated addresses (announcement).
12 November 2019Release 0.15.0.0 “Carbon Chamaeleon” removes the code that creates standalone payment IDs, and long payment IDs can no longer be used (release notes and Moneropedia).

The announcement gave four reasons. Reusing a long ID can link one person’s transactions. It had to be attached separately, so users forgot it and needed support to recover their funds. Services carried extra support work. And a transaction can hold only one, so withdrawals could not be batched.

What survives is the 8-byte payment ID inside an integrated address. It is encrypted with a one-time key known only to sender and receiver, so only the receiver can match it, as the integrated address docs explain. They recommend integrated addresses to businesses that accept Monero automatically, because making one needs no private key and no shared counter, and subaddresses to individuals. The same page warns that these are technical tags, not order or invoice numbers.

If a deposit page still asks for a 64-character payment ID, treat it as a legacy flow. The current command-line wallet refuses to send one: it prints that long payment IDs are obsolete and tells you to notify the receiving party, as its source code shows.

Which Monero address should you paste into a payout?

It depends on who will receive the XMR.

Which address to paste for a Monero payout
Where the XMR goesPasteWhy
Your own walletA new subaddress (95 characters, starts with 8) for each swapIt is the documented default for receiving, and a fresh one stops the paying service from easily linking your payouts. Every subaddress belongs to the same seed and the same balance.
Your own wallet, when you only have the main addressThe standard address (95 characters, starts with 4)It works, but reusing it links your swaps through the payout address.
An exchange or shop account that shows an integrated addressThe whole 106-character integrated addressThe payment ID inside tells the receiver which account to credit. The Ghostex Monero field has no separate payment ID box, so the integrated address is the way to carry one.
An exchange that shows an address and a separate payment IDNot the plain address. Ask for an integrated address, or receive in your own wallet first and forward the XMR from thereA deposit that arrives without its ID may not be credited automatically. Forwarding costs a second transaction and another 10-block wait, covered in Monero transaction time.

Ghostex accepts all three mainnet types and rejects everything else. For the per-asset facts, see the Monero asset page. Paying with ether? The ETH to XMR swap guide walks through the same choice step by step.

What does the address check in the swap form catch?

When you paste an address, the form checks it against the Monero format before an order exists. It catches four things, quoted here as the form words them:

  • Another coin’s address. A Bitcoin address gets “This looks like a Bitcoin address. Enter a Monero address.”, and a 0x address gets “This looks like an EVM (0x…) address. Enter a Monero address.”
  • A typo or a cut-off copy. A wrong character fails the checksum: “Checksum doesn’t match. Check the address for typos.” A copy that lost characters is not 95 or 106 long and gets “That isn’t a valid Monero address.”
  • A test-network address. A correctly formed address from a test network, starting with 5, 7, 9, A or B, is refused with the testnet message.
  • Spaces inside the address. “Addresses can’t contain spaces.”

The check tests format and checksum, not ownership: a valid address that is not yours passes. After pasting, compare the first and last characters with your wallet’s receive screen. Address poisoning and clipboard malware both replace one valid address with another, and a checksum cannot see that.

Does a new subaddress for every swap make you private?

It helps against one observer: the service paying you. The Monero documentation says a fresh subaddress for each payout stops that service from easily knowing it is you receiving again. It names the exception, a deliberate “Janus attack” by a service or several colluding services, and says perfect unlinkability needs a separate wallet seed. It also does nothing if you hold an account with the service, because the account already links your payouts.

Two more cautions from the same page. Sweeping several subaddresses into one address in a single transaction links them on the blockchain, so move funds one subaddress at a time if you want to keep them apart. And labels you give subaddresses are not restored when you recreate a wallet from its seed, although the addresses themselves are. What each chain reveals in a swap is covered in how to swap Bitcoin to Monero privately.

Address facts in this guide follow the Monero source code, release notes and documentation, and the address check in the Ghostex swap form, as checked on . They change only through a network upgrade or a form update. General information, not financial or legal advice. Product facts follow the Terms and the Privacy policy.

FAQ

Monero addresses: questions

Does a Monero address start with 4 or 8?

Both are normal. A standard address starts with 4 and a subaddress starts with 8, and both are 95 characters long. An integrated address is 106 characters and also starts with 4.

What is a Monero integrated address?

A standard address with an 8-byte payment ID built in, 106 characters long. The payment ID is encrypted inside the transaction, so exchanges and shops use it to match a deposit to an account.

Is a Monero payment ID still needed?

A separate 64-character payment ID is obsolete: Monero removed it in release 0.15 in 2019. The 8-byte ID inside an integrated address is still used, and you never type it on its own.

Should I use a subaddress or the standard address for a swap payout?

A new subaddress. The Monero documentation says it is what you should use by default, and a fresh one for each swap stops the paying service from easily linking your payouts. The standard address works too, but reusing it links your swaps by address.

Can I paste an integrated address into a Ghostex payout?

Yes, the address check accepts 106-character integrated addresses. Use one only when the destination, such as an exchange account, gave it to you; for your own wallet a subaddress is the better choice.

Why does the swap form say my Monero address is invalid?

Usual causes: it is not 95 or 106 characters because part was lost in copying, a character was mistyped and the checksum fails, it is a test-network address starting with 5, 7, 9, A or B, or it belongs to another coin such as Bitcoin or a 0x address. Copy it again from your wallet’s receive screen.

Five AI agents24/7

Receive XMR on a fresh subaddress

Create a new subaddress in your wallet, choose the coin you hold and paste it into the payout field; the form checks the format before you start. Swaps start at $20, or $50 when on-chain Bitcoin or mainnet Ethereum is on either side, and the flat 0.48% fee is already in the quote.

Exchange now